How to Clean Toilet Siphon Jet [Easy and Comfortable Ways]

When it is flushing time, an unclogged siphon jet clears up the debris within the least possible time. When you get to see the water level come to rise during flushing, then it is an alarming sign. Besides, when your toilet is chasing to empty the tank, it is high time to clean your siphon jet.

Here in this article, we will tell you on how to clean toilet siphon jet. No worries, we will share the best method that will serve your purpose to clean it efficiently.

What is A Toilet Siphon?

A gravity toilet is the smartest edition from its predecessors. The siphonic design allows it to infuse a high volume of water stream and so we call it a Siphon toilet.

Toilet siphon comes with a molded pocket placed against the siphonic tube considered as a drain pipe. The P-trap siphonic tube has a curved design, enabling it to stop sewer gases wafting into the toilet. Moreover, the lower part of that curved tube has a valve filled with air, so once you want to stop the influx of water, just tap it.

Apart from the tube, it comes with a tank full of water and attached with a flapper under it. This flapper allows water to come inside the toilet bowl.

At the frontline of the passage of the toilet bowl, the jet rims are placed nearby. Among many smart components, the floating cup is a noteworthy one that we find in this toilet. The cup tells the system about the water level.

The floating cup or ball comes to rise along with the water level. And this is how it signals the valve whether to let the water come inside or stop right away.

Know the Science Behind the Siphon Jet:

how to clean toilet siphon jet

Before you come to know how to clean toilet jets, know the science behind it.

An intense water stream is the secret of every flush mechanism. Among many flushing elements, the siphon jet is noteworthy.

Let’s figure out the key components of every Siphonic Toilet

  • S shape trap way without skirted design
  • Small hole in toilet bowl
  • Long toilet-bowl
  • Jet-hole positioned against the waste hole
  • Toilet Rim

We may seldom know the water stream mechanism. For example, how water stream releases and which components pave the way of it.

Well, the two parts of your toilet play an important role in refilling the water and releasing it. The first one is the filling valve, and it pushes water to come inside the toilet tank. On the flip side, the flushes valve releases a sufficient level of water from the tank to the bowl.

The final destination of released water from the toilet bowl is leading to the septic tank from the funnel, which is called “trap way”. Well, the size of the trap way and bowl would be making differences from one system to another.

Well, the whole system leads the water downward using gravitational force; here is why the siphonic flush system is also called gravity flush.

Symptoms of Clogged Jets

More or less, every toilet gets clogged after flushing it over and over again. If we regularly clear up the fish out of it, then we won’t go through a hard time during cleaning.

Calcium & mineral both are the main culprit, and they constantly build up across the big hole. These particles come from the water itself, and this kind of water is known as hard water.

Every time flush your toilet, they come and join the team. That being said, the more time passes away, the more mineral deposit in the toilet.

Toilet jets clogged deeply under the circumstance when you don’t maintain the Siphonic washing system properly. And, when you leave it dirty, this will be deteriorating.

How to Inspect the Jet?

Before you clean the system, determine the toilet jet condition first, allowing you to sort out which method you need to follow. Using a small mirror, you may easily come to know how can I clean out the flush holes around the rim of my toilet.

After inspecting it, you will find out two types of problems, and they are:

  1. Dark spots of orange or black color
  2. White or rust-colored stain

The first type of deposit is caused by bacteria, and mineral deposits are responsible for the second one.

You May Also Like: Can You Get Pregnant From A Toilet Seat

How to Clean Toilet Siphons?

Let’s imagine the scenario when we pull the flush lever—the aftermath of pulling the lever making the flush valve to release water following two ways.

The first water stream path is under the small holes of the seat rim. So, you need to know how to clean toilet rims holes.

Secondly, but the most important factor is the path of a siphon jet-hole. This is the key component that shoots the maximum amount of water to the trap way. Here is why you need to invest your maximum effort to clean toilet jets.

Things You Will Need:

  • Plunger
  • Distilled white vinegar
  • Nail-Free Toilet brush with stiff nylon bristles
  • Baking Soda
  • Hand gloves
  • Coat Hangers
  • Pumice stone

Tip 1: Remove Calcification & Unclog Toilet Jets

We have already mentioned about hard water containing minerals like Calcium and Magnesium.

Since the calcification is a constant process, you must regularly clear up it and allow calcium buildup in the toilet drain.

There would be two types of cleaning methods while dealing with calcification. The first one is for a regular basis, and the second one will apply during the deep clean toilet siphons.

Method A:

This method is only applicable before the toilet jets clogged. You just need to clear up the stains or deposits as long as you notice them right away.

At first, you need to turn off the water supply. Start flushing the toilet to the least volume as long as the calcification comes to an expose; stop pulling the lever.

Since the rust or white-colored stain vivid to you, get your hands on the toilet plunger, wear the rubber gloves as well.

Once, you rinse well through the plunger then pull the flush once again. But this time, you will forcefully push it so the water stream will kick out the leftovers across the hole.

Method B:

You are obviously facing a hard time since it’s too late to apply the first method.   Moreover, the deposits from calcification seem overloaded.

Now, you need to apply the scrubbing method with a Nail-Free Stainless-Steel toilet brush. That being said, you will scrub, but it won’t scratch across the jet-hole.

If the deposits seem more stubborn, then it is high time to pour baking soda on the tip of the brush. Afterward, keep brushing until the rust won’t go away, and you may use the flush once again.

Hopefully, you will get over from the residue; if not, put rubber gloves to save your hands. Take the pomace stone, the final weapon, and rub across the surfaces. When you get to see all the gunk are gone for good, then pull the flush.

Tip 2: clean toilet jets from Bacteria

Many of us, unaware of what is the black stuff under the toilet rim or across the jet hole? Once you find out such a thing, then get ready to clean your toilet from Bacteria.

Bacteria growth under the rim and holes is alarming, but the good thing is you may easily deal with such flexible stains.

Step 1: The first and foremost task for you is to make a solution of bleach. The ratio of it would be 1:10, so you may pour suppose 10 liters of water against 1kg of bleach.

Step 2: Once you prepare the solution, then pour the solution right inside the overflow tube of the tank.

Step 3: Now, the rest of the task will be done by the magic of the bleach solution. Stay 5 minutes and flush the toilet; afterward, the whole pack of bacteria will go away.

Tip 3: How to clean under toilet rim

You have already come to know how to clean toilet siphon jet. Well, if it is about calcification, then apply the same thing as a toilet bowl rim cleaner, that works.

For the bacteria-killing, you need to add bleach solution additionally. So, let’s follow these steps below:

  • Pull the levers and flush the toilet
  • Apply, bleach solution inside the tube to kill bacteria
  • Use the toilet brush as a toilet bowl rim cleaner
  • Keep scrubbing the bowl vertically and blocked toilet bowl inlet holes
  • Flush your toilet and rinse the toilet brush applying hot water

Tip 4: How to remove limescale from toilet rim

Before getting your hands on the cleaning limescale from toilet rim, you need to ensure that it won’t emit water. In order to do so, you have to rotate the valve clockwise, making it stop to bring any water. Afterward, just follow these steps:

  • Flush the water and let the water stream to remove the dirt from the outer layer
  • Now you may apply the vinegar directly where you see stain under the seat rim
  • Scrub gently using the toilet brush across the bowl
  • Shut on the valve and bring it back to work
  • Flush once more and rinse your toilet brush thoroughly

You May Also Like: Can Two Toilets Share the Same Drain

Frequently Asked Questions (FAQs)